Which is a good PE float with multiple specifications of rotational molding

Rolling plastic PE float manufacturer

　　Brand: Junyi; Name: Lifting Float

　　Material: PE (polyethylene), diameter: 800mm, length: 1200mm, inner hole: 26mm

　　The lifting float has an olive shaped appearance and is composed of two halves. If damaged, it can be easily disassembled and replaced

　　There is a 26mm through-hole in the middle, through which a steel wire rope passes through the float, and both ends are fixedly connected with stainless steel gaskets and clamps.

　　The lifting float shell is made of imported environmentally friendly polyethylene material, which is integrally formed by rotational molding process. It is filled with polystyrene foam and solidified by 10KG pressure steam foaming. The color is warning color: traffic yellow, with bright and eye-catching colors,

　　There are river crossing markers, shore connecting markers, navigation markers, river crossing markers, tail markers, and bridge and culvert markers used to indicate the waterway perimeter and route; There are triangular buoys, floating drums, light boats, left and right navigation buoys, bar shaped buoys, etc. used to mark obstacles; Used to indicate channel depth, overhead and underwater pipelines, forecast and guide water conditions. Channel markings and navigation marks; Inland river warning buoys are classified based on the reliability of their deployment locations, including fixed navigation marks and floating navigation marks. The commonly used classification method is based on the working principle of navigation marks. According to their working principles, there are visual navigation marks, audio navigation marks, and electronic navigation marks. Among them, visual navigation marks include lighthouses, light stakes, markers, light buoys, buoys, light boats, mooring equipment, and navigation marks;

　　Port water warning plastic float PE float

(1) The floating float adopts a circular cross-section, with twin tubes connected in parallel. The diameter of the float is Φ 760mm, and a 1m high grille is suspended under the float. The length of the float is 3m.

(2) The support device inside the guide rail is connected to the float through a transition device, which forms a slight arc under the action of water flow and wind force. The float is connected to each other with a cross hinge seat, so that the float can have a certain degree of freedom to deflect in the left and right directions.

(3) A fixed walking platform and safety barrier are installed between the top connections of the double float, which can be used for cleaning surface pollutants and conducting operation, inspection, and maintenance.

（4） Main design calculations and requirements

Rolling plastic PE float manufacturer